Bar type Ionizer

HDC-AC with built-in high-voltage power supply

Choose from two types of nozzles depending on the purpose

                   

 

For rapid static elimination: High-flow type H nozzle (4 holes)

 

	350	600	850	1100	1350	1600	1850	2100	2350	2600	2850	3100
0.05MPa	22	41	53	62	68	92	130	145	149	154	159	163
0.1MPa	32	59	81	95	105	112	194	223	229	244	250	259
0.2MPa	48	89	122	151	168	180	294	328	343	362	374	383
0.3MPa	61	117	165	200	230	248	381	426	466	496	516	531
0.4MPa	78	149	208	259	293	321	499	559	614	654	678	698
0.5MPa	95	177	255	323	362	393	622	687	748	806	848	882

 

For low air consumption: Low-flow type L nozzle (2 holes)

	350	600	850	1100	1350	1600	1850	2100	2350	2600	2850	3100
0.05MPa	11	22	33	44	50	55	80	91	100	108	115	126
0.1MPa	16	32	48	52	60	81	112	130	146	158	171	184
0.2MPa	26	48	70	91	106	129	177	201	227	246	270	289
0.3MPa	34	63	95	123	149	173	240	276	303	333	363	397
0.4MPa	42	82	120	157	188	222	306	363	388	423	461	492
0.5MPa	51	91	143	187	233	274	374	425	471	515	556	598

 

Models according to electrode dimensions

 

Optional Parts to support easy static elimination

CABX custom AC adapter                                      : OCABX-DA (input voltage AC100V-240V)

Intermediate bracket                                             : OCABX-SUSP-A (over 1100mm comes as standard equipment)

Power Supply and Signal Extension Cable      : OCABX-ENC3M (length: 3m)

Low-Flow type L nozzle

Tungsten emitter needle type                           : OCABX-NDL-LW01

Silicon emitter needle type                                  : OCABX-NDL-LS01  

Glass emitter needle type                                    : OCABX-NDL-LG01

High-Flow type H nozzle

Tungsten emitter needle type                           : OCABX-NDL-HW01

Silicon emitter needle type                                  : OCABX-NDL-HS01

Glass emitter needle type                                    : OCABX-NDL-HG01       

 

                     

custom AC adapter          Intermediate bracket    Power Supply and Signal tension Cable

Specifications

Model	Eliminator CABX
Ion Generation Method	Corona discharge method (HDC-AC)
Input Power Supply	DC24V ±5%
Electric Consumption	3.6VA
Output Voltage	10kVo-p (0 to peak)
Output Voltage under abnormal circumstances	No voltage contact output (by normal close MOSFET relay)
Unit dimension	350 to 3100x92x29mm (WxHxD)
Air Supply Range	less than 0.5MPa
Ion Balance	Within ±30V (distance 300mm, air pressure 0.3MPa at time of supply)
Operating Environment	Surrounding temperature: 10 to 40°c surrounding humidity: 5% to 85% (no condensation) Air Supply: clean dry air
Accompanying items	Ooperation manual, mounting bracket, power supply and signal connector cable (3m), intermediate bracket (over 1100mm)

 

Dimensional Diagrams