| JR3203ERT | JR3303ERT (JR3303EBV) |
JR3403ERT | JR3503ERT *5 |
JR3603ERT *5 |
||
| De-panelling Range Limit | X & Y Axes | 195×190mm | 295×315mm | 395×395mm | 505×505mm | 505×615mm |
| Z Axis | 35mm | 90mm*6 | 82mm | 95mm | 95mm | |
| Max. PTP Speed*1 | X & Y Axes | 700mm/sec | 900mm/sec (800mm/sec) |
900mm/sec | ||
| Z Axis | 250mm/sec | 400mm/sec | ||||
| Max. CP Speed*1 | XYZ Combined | 600mm/sec | 850mm/sec | |||
| Cutting Trajectory Precision | 0.2mm（nominal standard） | |||||
| Repeatability*2 | X Axis | ±0.006mm | ±0.007mm | ±0.008mm | ±0.008mm | |
| Y Axis | ±0.01mm | |||||
| Z Axis | ±0.008mm | |||||
| Applicable Board Materials | Glass Epoxy, Paper Phenol, etc. (maximum board thickness 1.6mm) | |||||
| Power Source | AC100～120V±10% / AC200～240V±10% （single phase） | |||||
| Power Consumption | 250W | |||||
| Supplied Air Pressure*3 | 0.5～1.0Mpa (5～10kgf/cm²) *Dry Air | |||||
| Air Consumption Volume*4 | 200Nℓ/min or more | |||||
| Spindle Motor | Rated Rotating Speed:40,000r/min | |||||
*1 Maximum speed can vary depending upon conditions.
*2 Repeatability was measured at a constant temperature for the robot unit only and does not represent a guarantee of absolute precision.
*3 Be sure to use dry air. Supplying air containing moisture or oil can damage the device.
*4 If the air volume is low, the vacuum will lose pressure, thereby reducing its dust collection efficiency.
*5 The safety cover is optional for the JR3503ERT. Also, the JR3603 does not come with a safety cover. Please prepare a safety cover at the user side.
*6 The workpiece mounting height is fixed with the JR3303EBV, therefore the Z-Axis moving range is not set.
Please contact us regarding CE declarations for EU compliance.
Specifications may be modified without prior notice to improve product quality.
Reviews
There are no reviews yet.