SMC POSI L

SMC POSI L

SMC carbon arms with 1 encoder to measure the distance the arm travels. With this arm and encoder, it is possible to verify the position due to the distance the arm travels. The encoder is mounted inside the arm to safe guard that nothing can interfere with the distance measurements.

The SMC POSI L arm can work in both horizontal and vertical position and thus, be roof or wall mounted. The accuracy of the encoder is 0.32 mm and the arm together with a TPS controller control the sequence and position.

l Carbon arm with position control up to 200 Nm.

l Encoder measures the distance the arm travels.

l Verify position due to distance.

l Can be mounted both in horizontal and vertical position for maximum flexibility.

l Accuracy of encoder 0.32 mm.

l Control the sequence and position together with TPS controller.

SMC POSI LA

SMC carbon arms with 2 encoders to measure the length the arm travels and the angle of the arm to determine the position of the arm/tool. With this SMC carbon arm it is possible to verify the position due to the length the arm travels together with an encoder that measures the angle of the arm. The length encoder is mounted inside the arm to safe guard that nothing can interfere with the length measurement and the angle encoder are mounted at the top of the arm. The SMC POSI LA can work in both horizontal and vertical position and thus be roof or wall mounted. The accuracy of the encoders is 0.32 mm and the arm together with a TPS controller will control the sequence and position.

l Carbon arm with 2 encoders to control position.

l Encoders measure the arm travel length and the angle of the arm to determine the position.

l Can be mounted both in horizontal and vertical position for maximum flexibility.

l Accuracy of encoder is 0.32 mm.

l Control the sequence and position together with the TPS controller.

l Arms available up to 200 Nm.

SML/SMS T-SERIES POSITIONING ARMS

The Atlas Copco T-series of arms are built to handle the most demanding industrial situation when you need to control the sequence and the position.

The T-series arms are equipped with two encoders, SMS T-series have 2 angles encoders to determine the position and SML T-series have 1 linear encoder and 1 angle encoder to determine the position. The arms are delivered with balancer, encoders and encoder cables ready to be plugged into the TPS controller.

l Control the sequence and position together with TPS controller.

l Excellent working area for work bench assembly stations.

l Available up to 100 Nm.

 

 

SMC CARBON ARMS WITH 1 ENCODER
Model Ordering No.
SMC 12 1150 POSI L 4390 1510 77
SMC 12 1600 POSI L 4390 1511 87
SMC 12 2100 POSI L 4390 1512 87
SMC 25 1150 POSI L 4390 1514 77
SMC 25 1600 POSI L 4390 1515 87
SMC 25 2100 POSI L 4390 1516 87
SMC 25 2600 POSI L 4390 1517 87
SMC 50 1600 POSI L 4390 1518 77
SMC 50 2100 POSI L 4390 1519 87
SMC 50 2600 POSI L 4390 1520 87
SMC 100 1600 POSI L 4390 1522 87
SMC 100 2100 POSI L 4390 1523 77
SMC 100 2600 POSI L 4390 1524 87
SMC 200 1600 POSI L 4390 1526 87
SMC 200 2100 POSI L 4390 1527 87
SMC 200 2600 POSI L 4390 1528 87
SMC CARBON ARMS WITH 2 ENCODERS
Model Ordering No.
SMC 12 1150 POSI LA 4390 1510 79
SMC 12 1600 POSI LA 4390 1511 79
SMC 12 2100 POSI LA 4390 1512 79
SMC 25 1150 POSI LA 4390 1514 79
SMC 25 1600 POSI LA 4390 1515 79
SMC 25 2100 POSI LA 4390 1516 79
SMC 25 2600 POSI LA 4390 1517 79
SMC 50 1600 POSI LA 4390 1518 79
SMC 50 2100 POSI LA 4390 1519 79
SMC 50 2600 POSI LA 4390 1520 79
SMC 100 1600 POSI LA 4390 1522 79
SMC 100 2100 POSI LA 4390 1523 79
SMC 100 2600 POSI LA 4390 1524 79
SMC 200 1600 POSI LA 4390 1526 79
SMC 200 2100 POSI LA 4390 1527 79
SMC 200 2600 POSI LA 4390 1528 79

Reviews

There are no reviews yet.

Be the first to review “SMC POSI L”

Your email address will not be published. Required fields are marked *