TPS CONTROLLER

TPS CONTROLLER – CONTROL THE SEQUENCE AND THE POSITION

With a TPS controller you are always sure, that the operator tightens the joints in the correct sequence and in the correct position.

l Up to 50 jobs and up to 500 positions.

l OK/NOK signal on position.

l the tool will not start when it is out of position.

l Batch count together with OK/NOK on position.

l Works together with Atlas Copco electric tools and RE controlled pneumatic tools.

l Possibility to save and upload set up through a PC.

l Easy and fast set up and programming.

l Error proofing solution.

l ESD approved.

HOW TO ORDER

  1. TPS Controller
TPS CONTROLLER
Model Ordering No.
TPS Controller 8202 9004 10
  1. Select positioning torque arm by style (T-series linear or swivel, or SMC telescopic) and torque arm capacity
  1. Cable TPS to tool controller
CONTROLLER ACCESSORY
Model Ordering No.
I/O Extension TPS 4390 2049 00
  1. Power supply – optional (needed for MTF 6000)

NOTE:Order power cord separately.

  1. Select other options if applicable
POWER SUPPLY/CORD
Model Ordering No.
Power Supply  
24VDC 30W 4222 1728 50
Power Cord  
EU 4222 1801 13
US 4222 1802 13
UK 4222 1803 13
India 4222 1804 13
Switzerland 4222 1805 13
Italy 4222 1806 13
Australia 4222 1807 13
China 4222 1809 13
OPTIONS
Model Ordering No.
Barcode License 4390 2045 00
Pneumatic License 4390 2046 00
Reporting License 4390 2047 00
CABLES
Model Ordering No.
Cable TPS to controller Power Focus/Tensor  
3m 4222 1715 03
10m 4222 1715 10
Cable TPS to controller Power Focus 600  
3m 4222 1852 03
10m 4222 1852 10
Cable TPS to EBL RE Driver  
1.5m 4222 1733 01
3m 4222 1733 03
Cable TPS to controller MTF6000 and G4  
1.5m 4222 1734 01
3m 4222 1734 03
Cable TPS to controller MTF400  
1.5m 4222 1735 01
3m 4222 1735 03
TPS Open End Cable  
3m 4222 1743 03
10m 4222 1743 10

 

 

 

Reviews

There are no reviews yet.

Be the first to review “TPS CONTROLLER”

Your email address will not be published. Required fields are marked *