Automated dispensing stations run at maximum speed and efficiency when EFD dispense valves are operated by ValveMate controllers. The ValveMate 8000 Multi- Valve Controller provides the primary control for deposit size. The controller is designed to bring fluid dispensing control close to the dispense valve and provide numerous user-friendly features that simplify valve setup and operation. Capable of operating up to (4) dispense valves independently or simultaneously, the ValveMate 8000 controller and control air solenoids offer state-of-the-art features and capability, maximizing automated assembly machine efficiency and convenience.
Features and Benefits
- 4 independent programmable actuation channels
- Maximum process control
- “On the fly” deposit adjustment
- Easily interfaced with a PLC
- Fast-response pneumatic solenoids
|Cabinet size||18.3W x 8.5H x 5.0D cm (7.22W x 3.38H x 2.0D”)|
|Weight||0.27 kg (0.6 lb)|
|Input AC (to power supply)||100–240 VAC, 50/60Hz|
|Output voltage (from power supply)||24 VDC, 1.25 Amp maximum|
|Power requirements||24 VDC, 1.25 Amp maximum|
|Feedback circuits||5 to 24 VDC NC solid-state switch 100 mA maximum|
|Initiate circuit||5 to 24 VDC signal|
|Cycle rate||Exceeds 600 per minute|
|Time range||Programmable 0.001 to 99.9 seconds|
|Approvals||CE, RoHS, WEEE, and China ROHS|
|7022004||8000 Multi-Valve Controller||Includes controller, stand, panel mount bezel
and spring clips, filter regulator, and air manifold
assembly with pre-wired pressure sensor.
|Order single or dual valve solenoid assemblies separately.
For each ValveMate 8000 ordered, select the appropriate solenoid assembly for the number of valves used. Each solenoid kit includes the prewired 6 pin connector and housing, 3.6 m (12 ft) cable cordset, input air hose, and push-in fittings.
|7022246||Single In-line Solenoid||Single in-line solenoid for one valve operation.|
|7022247||Dual Solenoid Block||Dual-solenoid block for two valve operation.|
|7022248||Tri Solenoid Block||Tri-solenoid block for three valve operation.|
|7022249||Quad Solenoid Block||Quad-solenoid block for four valve operation.|