Main Features
OAGIII-CB control the power supply and Air supply for AGZIII gun with connecting outside signal (sensor, foot switch, and other switch) and the pulsed air control.
Specification
| Model | OAGⅢ-CB |
| Available model | AGZⅢ |
| Power Voltage | 24 VDC (with AC adaptor AC100~240V use AGZⅢ adaptor) |
| Electric Consumption | 0.2A (with AGZⅢ gun) |
| Indication | Green: Supply the power and Air to AGZⅢ |
| Supply Air | Clean and Dried air |
| Available air pressure | 0.05MPa~0.7MPa |
| Maximum air consumption | 500ℓ/min (ANR) only Contoller |
| Air output control | CONT: Continuously blow, PULSE Hi: High Pulse blow (10Hz), PULSE Lo: Low Pulse blow (5Hz) *5 |
| Input control | Open the INPUT port: Start to work, Close the INPUT port: Stop to work. |
| Available Environment | 0 to 40℃ /85%RH or less (no condensation) |
| Dimensions | 135×55×75 mm (W×H×D) exc. protrusions. |
| Weight | Approx. 490g |
| Accessories | Connecting cable with AC adaptor (2m), Connecting cable with AGZⅢ (0.3m), grounding cable, Air tubing (Φ6mm x 3m), Operation manual, |
| *5: The life time of electric valve in the controller is below 50 million times | |
Flat nozzle for AGZIII
OAG-F
Brush for AGZIII
OAG-BRS
This is the optional part for brushing off the dust.
Three kinds of size of brush
*OAG-BRS-1: nylon brush
diameter φ0.1
*OAG-BRS-2: nylon brush
diameter φ0.2
*OAG-BRS-3: nylon brush
diameter φ0.3 Available for AGZ/ANZ series
Discharge Needle for AGZIII
DN-W17
Extension Cable for AGZIII
OAGIII-ECAB-L【】
