Specification
| Model | AGZ Ⅱ-PA |
| Input power supply | 24 VDC (AC adapter supplied; compatible with 100 to 240 VAC) |
| Current consumption | 0.1 A |
| Ozone density | 0.04 ppm or less (at 200 mm) |
| Fluid used | Clean air |
| Operating Environment | 0 to 40℃/65%RH or less (no condensation) |
| Supply air range *6 | 0.3 to 0.6 MPa |
| Main unit dimensions | 180×25×175 mm (L×W×H) (when wave motion nozzle is attached) |
| Weight | Approx. 330g (when only the wave motion nozzle is attached) |
| Standard Part | Operation manual, AC adapter, connector cable, wave motion nozzle, adjustable flow nozzle |
| *6: Be sure to use clean, dry air for the supply air. Moreover, when the ionizer’s power supply is in the ON status, make sure that air is being supplied when the ionizer is being used. (Applies to all models that use air) | |
Dimensional Diagram
