Specification
| Model | ANZ-SC3 |
| Input Voltage | DC24V (with AC adapter for AC100 to 240V) |
| Indication | Green: Normal condition |
| Red: Abnormal condition | |
| Buzzer Alarm | When H.V. is abnormal, the buzzer is on. |
| Abnormal signal output | Contact output under abnormal condition |
| (MOS FET Realay Normally close, DC30V less 100mA) | |
| Ion Balance | Under ±15V |
| Ozone density | Under 0.04ppm (Distance at150mm from the nozzle hole) |
| Air Supply | Clean and Dry air |
| Air pressure range | 0.05 to 0.6 MPa (with Speed Controller) |
| Air consumption | Maximum 190 ℓ/min (ANR) |
| Air blow | CONT: Continuously blow |
| PULSE Hi: High Speed Pulse(10Hz) | |
| PULSE Lo: Low Speed Pulse(5Hz) *7 | |
| Environment | 0 to 40℃ |
| 15 to 65%RH (without Condensation) | |
| Dimensions | ANZ body: 18 dia ×154L(mm) |
| Control box: 135W×50H×75D(mm) | |
| Weight | ANZ body: 95g |
| Control box: 570g | |
| Accessories | ANZ body, Control box, AC adaptor, Grounding cable, Holder (4 pcs), contact pin(5 pcs), air tubing, manual |
| Option | Emitter needle: DN-W17 |
| Air Pressure Guage | |
| Nozzle Application | Same as ZappⅡ |
| *7: The life time of electric valve in the controller is below 50 million times. | |
Dimensional Diagram
