Angle of the rotary sensor head 180 degree (hold each 45 degree) Application Example
Check the charge condition of film, resin, etc.
ESD check at the assembling process line
Check the ion balance of the ionizer
Specification
| Model | DZ4 |
| Signal detection method | Oscillating chopper *1 |
| Frequency of data indication | Each 0.5 second |
| Measurement range | Normal mode: 0.01~19.99 kV |
| I.B mode: 0.001~1.999 kV | |
| Measurement accuracy | ±10%rdg ± 2 digit |
| Measurement distance | 30 mm (between measurement object and sensor) |
| Measurement distance adjust | Red Light focusing system |
| Angle of the rotary sensor head | 180 degree (hold each 45 degree) |
| Indicator | LED indicator with back light |
| Polarity display | Both positive and negative polarity |
| Mode select | With MODE select button |
| Battery check | Indicate in LED indicator |
| Power supply | DC 9V alkaline battery 006P |
| Operating Environment | 0 to 40℃ |
| From 70% or less with no condensation | |
| Main unit dimensions | 66×22×138 mm (W×H×D) |
| Wight | 160 g |
| Accessories | 9V battery, soft storage case, Grounding Cable Strap |
| *1: The oscillating chopper is very susceptible to shock such as being dropped. Take care not to subject when using it. | |
Dimensional Diagram
