WINSTAT BF-X2MB

Static Eliminator Blowers

HDC-AC with built-in high-voltage power supply

 

Specification

Model BF-X2MB
Input Power DC24V (AC adaptor AC100~240V available)
CAPACITY 10 VA
OUTPUT VOLTAGE ±7,500 V0-p
ION BALANCE Below ±10 V (Distance at 300mm)
Air Volume 1.4 to 3.2 m3 / min
Air Speed 1.8 to 3.8 m/sec (with Straight Louver at 300mm center)
0.4 to 0.6 m/sec (with Wide angle Louver at 300mm center)
Ozone Density Below 0.004 ppm (Distance at 150mm)
Available Environment Indoor use, 0 to 40℃, 15~85%RH (without condensation)
Filter Pre-filter level
Signal Output Normal: ON
H.V Output abnormal or Fan abnormal (Red LED): OFF
MOS FET Relay, Normally Close contact output
Maximum current: 200 mA
Apply voltage: 30 VDC or less
Main unit Dimensions 150×182×66 mm (W×H×D) not including Fixing Bracket and projecting portion
Weight Approx. 1.0 kg (with Bracket)
Noise Level 59dB (A) (at 1m distance)
Accessories Manual, Signal output cable, Cleaning Brush, Wide angle louver
Optional Part Emitter Needle unit: DNU-W85
Filters: OBF-F2MA-1-10(package of 10)

 

Dimensional Diagram

Reviews

There are no reviews yet.

Be the first to review “WINSTAT BF-X2MB”

Your email address will not be published. Required fields are marked *