EBL SERIES
DESIGNED FOR LOW-TORQUE ASSEMBLY OPERATIONS
Featuring superior ergonomics and the latest technology, Atlas Copco’s EBL screwdriver is setting new standards for electric low-torque screwdrivers.
– Brushless motor provides long working life, extended service intervals and low maintenance requirements.
– Good ergonomics mean maximum operator comfort: comfortable grip, low tool weight and lower noise level due to the brushless motor.
– Reporting tool models have a batch count feature that ensures that all screws have been tightened.
– Soft-stop feature on certain models prevents damage to sensitive electronics and plastic assembly components.
Model | Screw Capacity | Torque Range Soft Joint | Free Speed | Weight | Length | Bit Drive | Ordering No. | ||
Nm | in lb | r/min | kg | lb | mm | ||||
Standard Models | |||||||||
EBL03 | M1-2 | 0.05 – 0.3 | 0.4 – 2.7 | 870 | 0.3 | 0.7 | 185 | Wing Type 4mm | 8431 0170 02 |
EBL03-Q | M1-2 | 0.05 – 0.3 | 0.4 – 2.7 | 870 | 0.3 | 0.7 | 185 | 1/4″ Hex | 8431 0170 04 |
EBL12 | M2-3 | 0.2 – 1.2 | 1.8 – 10.6 | 910 | 0.5 | 1.1 | 215 | 1/4″ Hex | 8431 0170 11 |
EBL12-1500 | M2-3 | 0.2 – 1.2 | 1.8 – 10.6 | 1500 | 0.5 | 1.1 | 215 | 1/4″ Hex | 8431 0170 41 |
EBL20 | M2-3 | 0.5 – 2.0 | 4.5 – 18 | 750 | 0.5 | 1.1 | 215 | 1/4″ Hex | 8431 0170 16 |
EBL21-1500 | M2-3 | 0.5 – 2.1 | 4.5 – 19 | 1500 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 43 |
EBL25 | M2.5-4 | 1.0 – 2.5 | 8.8 – 22.1 | 930 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 23 |
EBL25-1500 ᵃ | M2.5-4 | 1.0 – 2.5 | 8.8 – 22.1 | 1500 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 25 |
EBL35 | M2.5-4 | 1.0 – 3.5 | 8.8 -31 | 700 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 33 |
EBL45 ᶜ | M2.5-4 | 1.0 – 4.5 | 8.8 – 40 | 700 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 40 |
EBL55 ᶜ | M2.5-4 | 1.0 – 5.5 | 8.8 – 48 | 600 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 44 |
Soft-stop Models | |||||||||
EBL03-SS | M1-2 | 0.05 – 0.3 | 0.4 – 2.7 | 870 | 0.3 | 0.7 | 185 | Wing Type 4mm | 8431 0170 07 |
EBL12-SS | M2-3 | 0.2 – 1.2 | 1.8 – 10.6 | 910 | 0.5 | 1.1 | 215 | 1/4″ Hex | 8431 0170 15 |
EBL20-SS | M2-3 | 0.5 – 2.0 | 4.5 – 18 | 750 | 0.5 | 1.1 | 215 | 1/4″ Hex | 8431 0170 20 |
EBL25-SS | M2.5-4 | 1.0 – 2.5 | 8.8 – 22.1 | 930 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 28 |
EBL35-SS | M2.5-4 | 1.0 – 3.5 | 8.8 -31 | 700 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 38 |
Reporting Models | |||||||||
EBL03-RE | M1-2 | 0.05 – 0.3 | 0.4 – 2.7 | 870 | 0.3 | 0.7 | 185 | Wing Type 4mm | 8431 0170 55 |
EBL03-Q-RE | M1-2 | 0.05 – 0.3 | 0.4 – 2.7 | 870 | 0.3 | 0.7 | 185 | 1/4″ Hex | 8431 0170 06 |
EBL12-RE | M2-3 | 0.2 – 1.2 | 1.8 – 10.6 | 910 | 0.5 | 1.1 | 215 | 1/4″ Hex | 8431 0170 13 |
EBL12-1500-RE | M2-3 | 0.2 – 1.2 | 1.8 – 10.6 | 1500 | 0.5 | 1.1 | 215 | 1/4″ Hex | 8431 0170 18 |
EBL20-RE | M2-3 | 0.5 – 2.0 | 4.5 – 18 | 750 | 0.5 | 1.1 | 215 | 1/4″ Hex | 8431 0170 19 |
EBL21-1500-RE | M2-3 | 0.5 – 2.1 | 4.5 – 19 | 1500 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 47 |
EBL25-RE | M2.5-4 | 1.0 – 2.5 | 8.8 – 22.1 | 930 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 26 |
EBL25-1500-RE ᵇ | M2.5-4 | 1.0 – 2.5 | 8.8 – 22.1 | 1500 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 22 |
EBL35-RE | M2.5-4 | 1.0 – 3.5 | 8.8 -31 | 700 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 36 |
EBL45-RE ᵈ | M2.5-5 | 1.0 – 4.5 | 8.8 – 40 | 700 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 42 |
EBL55-RE ᵈ | M2.5-5 | 1.0 – 5.5 | 8.8 – 48 | 600 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 45 |
Soft-stop Reporting Models | |||||||||
EBL03-SS-RE | M1-2 | 0.05 – 0.3 | 0.4 – 2.7 | 870 | 0.3 | 0.7 | 185 | Wing Type 4mm | 8431 0170 08 |
EBL12-SS-RE | M2-3 | 0.2 – 1.2 | 1.8 – 10.6 | 910 | 0.5 | 1.1 | 215 | 1/4″ Hex | 8431 0170 17 |
EBL20-SS-RE | M2-3 | 0.5 – 2.0 | 4.5 – 18 | 750 | 0.5 | 1.1 | 215 | 1/4″ Hex | 8431 0170 21 |
EBL25-SS-RE | M2.5-4 | 1.0 – 2.5 | 8.8 – 22.1 | 930 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 29 |
EBL35-SS-RE | M2.5-4 | 1.0 – 3.5 | 8.8 -31 | 700 | 0.8 | 1.8 | 235 | 1/4″ Hex | 8431 0170 39 |
a EBL 25-1500 to be used with EBL Drive Plus.
b EBL 25-1500-RE to be used with EBL Drive Plus and EBL RE Module.
c EBL 45, 55 to be used with EBL Drive Plus.
NOTE: Max torque reduced to 80% when run on slow speed and soft joints.
d EBL 45-RE and EBL 55-RE to be used with EBL Drive Plus and EBL RE module.
NOTE: Max torque reduced to 80% when run on slow speed and soft joints.
All tools models, drives and cables are ESD and UL certified.
Tool box include cable for drive connection (standard models with 5 pins cable
and reporting models with 6 pins cable)
All the models are push-to-start or lever start configurable.
Optional Accessories
DRIVES | ||
Model | Ordering No. | |
EBL Drive | For Standard models and soft-stop models | 8431 0170 70 |
EBL RE_Drive | For reporting models and soft-stop + reporting models | 8431 0170 75 |
EBL Drive Plus | For all stand models and soft-stop models | 8431 0170 85 |
EBL Drive Plus is required for EBL25-1500, EBL25-1500-RE, EBL45, EBL45-RE, EBL55 and EBL55-RE |
EBL REPORTING MODULE | |
Model | Ordering No. |
EBL RE module | 8431 0170 76 |
RE module to be connected between EBL Drive or EBL Drive Plus and RE tool |
VACUUM PICK-UP ACCESSORIES | |
Accessories (not ESD approved) | Ordering No. |
Vacuum Pump – 220V | 4220 0062 00 |
Vacuum Pump – 115V | 4220 0062 05 |
Nozzle blank Ø8mm for EBL03 | 4220 0067 03 |
Nozzle blank Ø8mm for EBL12, 20, 21, 25, 35 | 4220 0070 03 |
Nozzle blank Ø14mm for EBL12, 20, 21, 25, 35 | 4220 0072 03 |
Vacuum Pick-up adapter for EBL03 | 4220 0080 30 |
Vacuum Pick-up adapter for EBL12, 20 | 4220 0080 31 |
Vacuum Pick-up adapter for EBL21, 25, 35 | 4220 0080 30 |
CABLES | |
Model | Ordering No. |
Cable (not ESD approved) | |
Spiral Cable, 1.3m (5pin) | 4220 0347 00 |
Spiral Cable, 1.3m (6pin) | 4220 0349 00 |
Heavy duty, cable 2.0m (5pin) | 4220 0132 00 |
Heavy duty, cable 2.0m (6pin) | 4220 0133 00 |
Cable (ESD approved) | |
Extension Cable ᵇ 3.0m (5pin) | 4220 0138 01 |
Extension Cable ᵇ 3.0m (6pin) | 4216 0115 00 |
b Maximum total length 8 m. |
PISTOL GRIP | |
Model | Ordering No. |
EBL12, 20 | 4220 0051 04 |
EBL21, 25, 35, 45, 55 | 4220 0051 05 |
(ESD approved) |
ANGLE HEAD | |
Model | Ordering No. |
Angle Head | |
Front part square drive 1/4″ (06) | 4210 4033 90 |
Hex bit drive 1/4″ (42) | 4210 4033 81 |
Hex quick change 1/4″ (Q) | 4210 4033 82 |
Adapter | |
Adapter EBL12,20 | 4210 4609 85 |
Adapter EBL21/25/35/45/55 | 4210 4609 81 |
Both angle head and adapter need to be ordered for mounting on EBL. |
Reviews
There are no reviews yet.